Pipeline and product specs set a water dew point you must meet. The grade that gets you there depends on what else is in the gas — and on what you cannot afford to lose.
Start from the dew point and the feed
Bulk water removal is usually 4A territory. If CO₂ and H₂S must also come down, 13X does both in one bed. If losing liquid hydrocarbons to adsorption is unacceptable — for example in LPG or natural gas liquids — 3A excludes them while still removing water.
Do not ignore liquids and contaminants
Free liquid water, glycol carryover, compressor oil and amines destroy sieve structure. A separator or coalescer upstream is cheaper than replacing a poisoned bed. Confirm the feed analysis before you finalize the grade.
Dew point is verified at the outlet
Design for the required outlet water content at your pressure and temperature, then verify with online dew-point measurement. Breakthrough is gradual; by the time a downstream instrument alarms, the front has already moved.


